[SOLVED] Programmer is not responding

Using Arduino Installation & Troubleshooting
#1

I just strated with Arduino UNO (I haven´t made any project yet). I´m tryinig to blink a LED, but whem I upload the sketch to the board this appears on the compilation box

Arduino:1.8.5 (Windows 8.1), Tarjeta:"Arduino/Genuino Uno"

El Sketch usa 948 bytes (2%) del espacio de almacenamiento de programa. El máximo es 32256 bytes.
Las variables Globales usan 9 bytes (0%) de la memoria dinámica, dejando 2039 bytes para las variables locales. El máximo es 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x3d
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x3d

My operating system is Windows 8.1 pro

#2

You might try this:

#3

Do you have the correct com port selected?

#4

When you open the Arduino program, go to (Tools). Then, check the (programmer) type. I'm using Arduino UNO and the programmer is (AVRISP mkII).

#5

Mohammad_Albati:
When you open the Arduino program, go to (Tools). Then, check the (programmer) type. I'm using Arduino UNO and the programmer is (AVRISP mkII).

The programmer type is only applicable if one uses an external programmer. If programming via the micro's boot loader, it has no effect.

#6