(solved) Upload sketch issue

Hi

I am having a an issue with uploading a sketch to my arduino (atmega328 on breadboard) I could upload sketches perfectly until my last upload when i added a delay() :| to the setup() and from here on i cant upload

I have attempted resetting manually, i also have a reset coming off my ftdi cable I do have another arduino to reburn the bootloader if it comes to that

Any help would be great

Error message?

Binary sketch size: 450 bytes (of a 30720 byte maximum) avrdude: stk500_getsync(): not in sync: resp=0x00 avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

The error message indicates that avrdude (the program used to upload) is unable to communicate with the bootloader.

Does your FTDI cable work with other processors?

It was working perfectly until i uploaded the sketch with the delay(500) in the setup() section of my code now for some reason it wont upload

EDIT:

Seems one of my jumper cables had a break in it, i replaced it and its working fine now :D

Thanks for the assist :)

Glad to know you have it working. Thank you for the follow-up.