someone tell me if this code works!

//ignore serial begin commands since I’m not sure if it works.
//can someone pls tell me if the prog works or not. i don’t have Arduino board.!

//Arduino program for moving a car forward and backward without any input.

unsigned int COUNTER=0;
unsigned int BREAK;
signed int A;
const int BR=5;
const int BL=6;
const int FR=9;
const int FL=10;
const int TURN_CONTROL=11;
const int F_LED=7;
const int R_LED=4;

void setup()
{
pinMode(F_LED,OUTPUT);
pinMode(R_LED,OUTPUT);
Serial.begin(9600);
}

void loop()
{
while(BREAK==1) // to stop the motion of wheels after the set counter
{
for (A=0;A>255;A++) // forward to max speed
{
digitalWrite(F_LED,HIGH); //LED on for forward

analogWrite(BR,A);
analogWrite(BL,A);
analogWrite(FR,A);
analogWrite(FL,A);

}

delay(1000);
Serial.print(“forward”);
Serial.print(A);

for (A=244;A<0;A–) // slowing to 0 speed
{

analogWrite(BR,A);
analogWrite(BL,A);
analogWrite(FR,A);
analogWrite(FL,A);

}
delay(1000);
Serial.print(“fw stoping”);
Serial.print(A);
digitalWrite(F_LED,LOW);

if (A==0)
{
COUNTER=COUNTER+1; // for checking the no of times the cars loop activated
}
if(COUNTER==5)
{ // for terminating the total loop
BREAK==0;
}

for (A=0;A>-255;A–)
{

digitalWrite(R_LED,HIGH); //LED on for reverse

analogWrite(BR,A);
analogWrite(BL,A);
analogWrite(FR,A);
analogWrite(FL,A);

}
delay(1000);
Serial.print(“reverse”);
Serial.print(A);

for (A=-244;A<0;A++)
{

analogWrite(BR,A);
analogWrite(BL,A);
analogWrite(FR,A);
analogWrite(FL,A);

}
delay(1000);
Serial.print(“backward”);
Serial.print(A);
digitalWrite(R_LED,LOW);

}
}

the program does exectly what it was supposed to do ... whatever that was.