# SPI am Raspberry pi pico

**URL:** <https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792>\
**Category:** Deutsch\
**Created:** [September 18, 2021, 4:17pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792 "2021-09-18T16:17:14Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![ar182](https://avatars.discourse-cdn.com/v4/letter/a/b19c9b/32.png) [@ar182](https://forum.arduino.cc/u/ar182)\
**Post date:** [September 18, 2021, 4:17pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/1 "2021-09-18T16:17:14Z")

</div>

Hallo,

kann mir jemand erklären, wie und wo ich die Kontrolle über die Pinbelegung  
am Pico bekomme.

Ich habe aktuell ein Ethernet-Shield w5500 (SCK 2; MOSI 3; MISO 4; SS 10) am laufen.  
Als Lib verwende ich Ethernet2.

LG

---

<div class="post-metadata">

**Author:** ![fony](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/fony/32/936882_2.png) [@fony](https://forum.arduino.cc/u/fony)\
**Post date:** [September 18, 2021, 4:29pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/2 "2021-09-18T16:29:14Z")

</div>

> [@ar182](#):
>
> Ich habe aktuell ein Ethernet-Shield w5500 (SCK 2; MOSI 3; MISO 4; SS 10) am laufen

Also wie ist die genaue Frage?  
Grüße

---

<div class="post-metadata">

**Author:** ![ar182](https://avatars.discourse-cdn.com/v4/letter/a/b19c9b/32.png) [@ar182](https://forum.arduino.cc/u/ar182)\
**Post date:** [September 18, 2021, 4:39pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/3 "2021-09-18T16:39:30Z")

</div>

> [@ar182](#):
>
> Hallo,
> 
> kann mir jemand erklären, wie und wo ich die Kontrolle über die Pinbelegung  
> am Pico bekomme.

Entschuldige, ich habe das Fragezeichen vergessen!

Es muss natürlich heißen.

Hallo,

kann mir jemand erklären, wie und wo ich die Kontrolle über die Pinbelegung  
am Pico bekomme?

---

<div class="post-metadata">

**Author:** ![HotSystems](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/hotsystems/32/219785_2.png) [@HotSystems](https://forum.arduino.cc/u/HotSystems)\
**Post date:** [September 18, 2021, 4:46pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/4 "2021-09-18T16:46:05Z")

</div>

> [@ar182](#):
>
> Ich habe aktuell ein Ethernet-Shield w5500 (SCK 2; MOSI 3; MISO 4; SS 10) am laufen.  
> Als Lib verwende ich Ethernet2.

Und das soll bei dir am Raspi pico laufen ?

---

<div class="post-metadata">

**Author:** ![my\_xy\_projekt](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/my_xy_projekt/32/810062_2.png) [@my\_xy\_projekt](https://forum.arduino.cc/u/my_xy_projekt)\
**Post date:** [September 18, 2021, 4:47pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/5 "2021-09-18T16:47:19Z")

</div>

> [@ar182](#):
>
> kann mir jemand erklären, wie und wo ich die Kontrolle über die Pinbelegung  
> am Pico bekomme?

Vielleicht hier anfangen:

> **[Raspberry PI Pico in der Arduino IDE programmieren](https://draeger-it.blog/raspberry-pi-pico-in-der-arduino-ide-programmieren/)**
>
> In diesem Beitrag möchte ich dir zeigen wie du den Raspberry PI Pico in der Arduino IDE programmieren kannst.
> 
> 
> 
> 
> https://youtu.be/GVmopQqWaQQ
> 
> 
> 
> 
> Die Arduino

Das PINOut, gibt die Nummern wieder, die Du benutzen kannst.

 ![](https://europe1.discourse-cdn.com/arduino/original/4X/0/5/e/05e6b81d9b5dfc19eeca22da2edebfe63383b37d.png)

---

<div class="post-metadata">

**Author:** ![fony](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/fony/32/936882_2.png) [@fony](https://forum.arduino.cc/u/fony)\
**Post date:** [September 18, 2021, 4:48pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/6 "2021-09-18T16:48:37Z")

</div>

Angeblich unterstützt Arduino IDE den RB Pico

> **[Raspberry Pico mit der Arduino IDE programmieren](https://www.heise.de/tests/Raspberry-Pico-mit-der-Arduino-IDE-programmieren-6001575.html)**
>
> Es hat nicht lange gedauert, bis aus der Community eine Anpassung der Arduino-Programmierumgebung für Raspberry Pico und andere RP2040 Boards erschienen ist.

---

<div class="post-metadata">

**Author:** ![ar182](https://avatars.discourse-cdn.com/v4/letter/a/b19c9b/32.png) [@ar182](https://forum.arduino.cc/u/ar182)\
**Post date:** [September 18, 2021, 4:53pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/7 "2021-09-18T16:53:02Z")

</div>

> [@HotSystems](#):
>
> Und das soll bei dir am Raspi pico laufen ?

ja!

---

<div class="post-metadata">

**Author:** ![ar182](https://avatars.discourse-cdn.com/v4/letter/a/b19c9b/32.png) [@ar182](https://forum.arduino.cc/u/ar182)\
**Post date:** [September 18, 2021, 4:57pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/8 "2021-09-18T16:57:13Z")

</div>

> [@my\_xy\_projekt](#):
>
> Das PINOut, gibt die Nummern wieder, die Du benutzen kannst.

Dir ist bestimmt aufgefallen, dass es den SPI-Bus 4x gibt.  
Und ich hätte gerne die Wahl.  
Einfach weil ich es wissen will.

---

<div class="post-metadata">

**Author:** ![fony](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/fony/32/936882_2.png) [@fony](https://forum.arduino.cc/u/fony)\
**Post date:** [September 18, 2021, 5:02pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/9 "2021-09-18T17:02:42Z")

</div>

> [@ar182](#):
>
> Dir ist bestimmt aufgefallen, dass es den SPI-Bus 4x gibt.  
> Und ich hätte gerne die Wahl.  
> Einfach weil ich es wissen will.

Noch mall, was ist die Frage wenn Du alles schon weißt ?

---

<div class="post-metadata">

**Author:** ![my\_xy\_projekt](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/my_xy_projekt/32/810062_2.png) [@my\_xy\_projekt](https://forum.arduino.cc/u/my_xy_projekt)\
**Post date:** [September 18, 2021, 5:09pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/10 "2021-09-18T17:09:37Z")

</div>

> [@ar182](#):
>
> Dir ist bestimmt aufgefallen, dass es den SPI-Bus 4x gibt.

Unsinn.  
den gibt es nur 2mal.  
Ein gutes Tut - erster Eintrag in der Google-Suche:

> **[Raspberry Pi Pico: Tutorials, Pinout, What You Need to Know (Updated)](https://www.tomshardware.com/news/raspberry-pi-pico-tutorials-pinout-everything-you-need-to-know)**
>
> How to make the most of the Raspberry Pi Pico and Raspberry Pi Pico W

Google suche - 3ter Eintrag.

> <https://arduino.stackexchange.com/questions/85234/raspberrypi-pico-spi-and-nrf24l01>

Da sollte Deine Lösung drin stehen. Und wie Du lesen kannst, musst Du schon schreiben, was Du verwendest. Denn erst dann ist klar auf welchen PIN's der SPI (der dann nur einmal vorhanden ist) tatsächlich aktiviert ist.

---

<div class="post-metadata">

**Author:** ![ar182](https://avatars.discourse-cdn.com/v4/letter/a/b19c9b/32.png) [@ar182](https://forum.arduino.cc/u/ar182)\
**Post date:** [September 19, 2021, 4:56am UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/11 "2021-09-19T04:56:56Z")

</div>

> [@fony](#):
>
> Noch mall, was ist die Frage wenn Du alles schon weißt ?

> [@ar182](#):
>
> Kann mir jemand erklären, wie und wo ich die Kontrolle über die Pinbelegung  
> am Pico bekomme?

Habe ich doch geschrieben. Ich will die Kontrolle.  
Also momentan ist es so, dass ich das Shield da angeschlossen habe, wo es funktioniert.  
Es gibt aber 5 Möglichkeiten, wo ich mein Shield anschließen kann.  
Das wäre dann so was wie SPI.setMOSI() usw.

---

<div class="post-metadata">

**Author:** ![my\_xy\_projekt](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/my_xy_projekt/32/810062_2.png) [@my\_xy\_projekt](https://forum.arduino.cc/u/my_xy_projekt)\
**Post date:** [September 19, 2021, 8:43am UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/12 "2021-09-19T08:43:00Z")

</div>

> [@ar182](#):
>
> Es gibt aber 5 Möglichkeiten, wo ich mein Shield anschließen kann.

Auch wenn Du es wiederholst, bleibt es falsch.

---

<div class="post-metadata">

**Author:** ![ar182](https://avatars.discourse-cdn.com/v4/letter/a/b19c9b/32.png) [@ar182](https://forum.arduino.cc/u/ar182)\
**Post date:** [September 19, 2021, 10:21am UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/13 "2021-09-19T10:21:22Z")

</div>

> [@my\_xy\_projekt](#):
>
> Auch wenn Du es wiederholst, bleibt es falsch.

Es geht doch um was ganz anderes 😡

Bleib beim Tema.

---

<div class="post-metadata">

**Author:** ![combie](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/combie/32/217369_2.png) [@combie](https://forum.arduino.cc/u/combie)\
**Post date:** [September 19, 2021, 10:51am UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/14 "2021-09-19T10:51:07Z")

</div>

> [@ar182](#):
>
> Es geht doch um was ganz anderes 😡

Sollten wir besser über dein (antisoziales) Verhalten reden?

---

<div class="post-metadata">

**Author:** ![fony](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/fony/32/936882_2.png) [@fony](https://forum.arduino.cc/u/fony)\
**Post date:** [September 19, 2021, 7:55pm UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/15 "2021-09-19T19:55:59Z")

</div>

Es ist ganz einfach, Du rufst morgen den Hersteller an und sagst das du das so und so haben willst, für einen winzig kleinen Obolus in die Kaffeekasse (+-10 mil $) bauen sie dir enen Prozessor was deinen kindlichen Vorstellungen entspricht.  
Zweite möglichkeit ist man liest genau die Datenblätter

---

<div class="post-metadata">

**Author:** ![jenrique\_aguado](https://avatars.discourse-cdn.com/v4/letter/j/f04885/32.png) [@jenrique\_aguado](https://forum.arduino.cc/u/jenrique_aguado)\
**Post date:** [September 23, 2021, 9:03am UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/16 "2021-09-23T09:03:04Z")

</div>

Hallo

Ich schlage vor, du besuchst diesen Link [GitHub - MarkTillotson/PicoSPI: Lightweight SPI library for RasPi Pico board using the RP2040](https://github.com/MarkTillotson/PicoSPI)

Mit der PicoSPI-Bibliothek ist es einfach, die SPI-Pins zu definieren.

Du kannst auch ein Beispiel sehen, das ich auf der Grundlage der vorherigen Bibliothek erstellt habe  
[Pi Pico SPI issues - Using Arduino / Programming Questions - Arduino Forum](https://forum.arduino.cc/t/pi-pico-spi-issues/907726)

gutes Gelingen

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [January 21, 2022, 9:03am UTC](https://forum.arduino.cc/t/spi-am-raspberry-pi-pico/906792/17 "2022-01-21T09:03:31Z")

</div>

Closed on January 21, 2022, 9:03am UTC

This topic was automatically closed 120 days after the last reply. New replies are no longer allowed.
