# SPL Meter using Wemos D1 mini

**URL:** <https://forum.arduino.cc/t/spl-meter-using-wemos-d1-mini/1132864>\
**Category:** General Guidance\
**Created:** [May 30, 2023, 11:48pm UTC](https://forum.arduino.cc/t/spl-meter-using-wemos-d1-mini/1132864 "2023-05-30T23:48:32Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![DVDdoug](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/dvddoug/32/671533_2.png) [@DVDdoug](https://forum.arduino.cc/u/DVDdoug)\
**Post date:** [May 31, 2023, 2:07am UTC](https://forum.arduino.cc/t/spl-meter-using-wemos-d1-mini/1132864/4 "2023-05-31T02:07:37Z")

</div>

The sample rate isn't that critical. High frequencies are normally weak (with natural sounds) and with a real SPL meter they are attenuated in the measurement ([A-weighting](https://en.wikipedia.org/wiki/A-weighting#:~:text=A-weighted%20SPL%20measurements%20of%20noise%20level%20are%20increasingly,also%20used%20for%20noise%20dose%20measurements%20at%20work.)) to account for the fact that our ears are most sensitive at mid-frequencies.

If your measurements are not weighted you can just find the peaks over a short period of time without worrying about about the sample rate.

> [@fedefranke97](#):
>
> In addition to the doubts about sampling and data processing that I mentioned earlier, I would like to know if my current hardware is suitable for achieving these goals or if there are any limitations I should consider.

**There are lots of "complications"** that make it impractical, if not impossible, to make an SPL meter for regulatory, health & safety, or legal purposes.

That said, I made an [SPL Meter](https://forum.arduino.cc/t/sound-sensor-which-one/962327/6) with different hardware. There are lots of comments and notes regarding the complications. (It's very simple and I don't do any weighting.)

---

_[View the full topic](https://forum.arduino.cc/t/spl-meter-using-wemos-d1-mini/1132864)._
