Hi, By datasheet this glcd 128x64 using ST7920 driver need at least 72us for each transaction except the clear command which needs 1.6ms. I'm doing the time delays in my library and it's working ok, but what is interesting is that there's a master library by cbm80amiga which is found here: cbm80a…

If you dig into the source code, you'll see something like this void ST7920_SPI::sendCmd(byte b) { SPI.beginTransaction(SPISettings(SPI_SPEED, MSBFIRST, SPI_MODE3)); digitalWrite(csPin, HIGH); SPI.transfer(0xF8); SPI.transfer(b & 0xF0); SPI.transfer(b << 4); digitalWrite(csPin, LOW); …

ST7920_SPI_master library not using delays for glcd128x64

Other Hardware Displays

system Closed January 18, 2022, 11:40am 13

This topic was automatically closed 120 days after the last reply. New replies are no longer allowed.

Topic		Replies	Views
ST7920 Interface Question Displays	54	38479	May 6, 2021
real hardware SPI on 328? Programming	17	4325	May 5, 2021
LCD to use to have the least impact on the execution speed of the arduino Displays	25	10237	May 6, 2021
Completely new to SPI, I need some help Networking, Protocols, and Devices	15	3439	May 6, 2021
LCD + SD on SPI Programming	28	13061	May 5, 2021

ST7920_SPI_master library not using delays for glcd128x64

Related topics