Standalone Arduino

Hi. I have an Arduino Uno and I am using arduino 1.0.5 IDE. I followed he procedures for bootloading an atmega328P-PU on a breadboard using an Arduino Uno from the link:

https://www.arduino.cc/en/Tutorial/ArduinoToBreadboard

I uploaded the ArduinoISP sketch first, made the connections(using the External Oscillator) and then wired it up. Then, I selected the programmer as Arduino as ISP, selected the board as Arduino duemilanove w/ Atmega328P . Then I selected the correct serial port and clicked Burn Bootloader. I got the following errors:

avrdude.exe: stk500_program_enable(): protocol error, expect=0x14, resp=0x50avrdude.exe: initialization failed, rc=-1 Double check connections and try again, or use -F to override this check.avrdude.exe: stk500_disable(): protocol error, expect=0x14, resp=0x51

How to solve this issue? Also, can I upload the bootloader directly by using it on the Uno in place of the original chip. If so, how? Regards, HarshDIksha

I think this will be a better tutorial.