# Step up/ step down game

**URL:** <https://forum.arduino.cc/t/step-up-step-down-game/1331747>\
**Category:** General Electronics\
**Created:** [December 13, 2024, 3:51am UTC](https://forum.arduino.cc/t/step-up-step-down-game/1331747 "2024-12-13T03:51:14Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![DaveX](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/davex/32/751443_2.png) [@DaveX](https://forum.arduino.cc/u/DaveX)\
**Post date:** [December 13, 2024, 5:53am UTC](https://forum.arduino.cc/t/step-up-step-down-game/1331747/4 "2024-12-13T05:53:37Z")

</div>

Most of the wiring and parts needed are detailed on:

> [@Best first 5 topics to read to reach Trust Level 1?](https://forum.arduino.cc/t/best-first-5-topics-to-read-to-reach-trust-level-1/1287592/1):
>
> [How to Wire and Program a Button](https://forum.arduino.cc/t/how-to-wire-and-program-a-button/1196000) -- A discussion of the [official Arduino "How to Wire and Program a Button" tutorial](https://docs.arduino.cc/built-in-examples/digital/Button/) that goes with the Arduino IDE's built-in [File/Examples/02Digital/Button.ino](https://github.com/arduino/arduino-examples/blob/main/examples/02.Digital/Button/Button.ino) example. This thread shows some concerns about the tutorial and advice about how to wire up a button safer and easier.

> [@How to Wire and Program a Button](https://forum.arduino.cc/t/how-to-wire-and-program-a-button/1196000/2):
>
> I thought @LarryD's diagram about wiring was good: [[image] ](https://europe1.discourse-cdn.com/arduino/original/4X/7/e/0/7e0ee1e51f1df32e30893550c85f0dd33244fb0e.jpeg)[LarryDButtons - Wokwi ESP32, STM32, Arduino Simulator](https://wokwi.com/projects/396911055973901313) Also: And there are good references at [Gammon Forum : Electronics : Microprocessors : Switches tutorial](https://www.gammon.com.au/switches) -- @nickgammon on the differences, software and hardware debouncing. Shows an oscilloscope plot of debouncing an Uno with 1uF capacitor for a 36ms response. [https://www.ganssle.com/debouncing-pt2.htm](https://www.ganssle.com/debouncing-pt2.htm) -- Jack Ganssle o…

and

[![](https://europe1.discourse-cdn.com/arduino/original/4X/7/e/0/7e0ee1e51f1df32e30893550c85f0dd33244fb0e.jpeg) ](https://europe1.discourse-cdn.com/arduino/original/4X/7/e/0/7e0ee1e51f1df32e30893550c85f0dd33244fb0e.jpeg)

Breadboard-wise, you need the legs of the LEDs on separate lines rather than both on the same connection as you show with:

 ![image](https://europe1.discourse-cdn.com/arduino/original/4X/a/6/1/a61bca1585ad941ce906441f54fbb21172851760.jpeg)

Turn the LEDs 90° to put the legs in different rows.

Of skip the many discrete LEDs and use a chain of NeoPixels and trade 28 wires and resistors for discrete LEDs for a srtring of smart LEDs with 1 control wire..

---

_[View the full topic](https://forum.arduino.cc/t/step-up-step-down-game/1331747)._
