I posted this last week and changed my inputs to be INPUT_PULLUP and set the software to look for a LOW signal. Which works great when I just a little jumper from ground to pins 2-7 my corisponding outputs go low triggering pins 8-13 so when 2 is low pin 8 goes low and fires a relay, 3 goes low and …

Still having trouble with digital reads

Topic		Replies	Views
my "output pin" is in "high" when not triggered and "low" when triggered Programming	14	2771	May 5, 2021
Setting the pins that switch a 4-channel relais creates low on other pin General Electronics	5	1015	May 6, 2021
Digital Pins not outputting enough voltage [solved] Programming	13	6294	May 5, 2021
Newbie Question Programming	18	1665	May 5, 2021
What could I be doing wrong? General Guidance	26	3934	May 5, 2021