Hi Support Team,
i am looking for a suitable LED IC Driver for a 6x8 or 8x6 LEDs String. In the worst case 2 or 4 LED IC to drive the 48LEDs.
Vbat=24V, (If=100mA, Vf=2,9V each LED)
Do you have any idea which IC Driver i could use or in which configurations.
Thank you
Regards
(Eng. Robotics: Gankam Fokou, Alvin Morgan)
cross posted here: >>> https://forum.arduino.cc/t/which-ic-driver-for-6x8-leds-or-8x6-leds-string/1050328
This is a community support forum.
24V is not enough to run a string of 8 LEDs, but a string of 6 should be ok.
Tpic6b595 would allow individual control of 8 strings. Unfortunately this is not an i²c chip.
@Foks50
Your other topic on the same subject deleted.
Please do not duplicate your questions as doing so wastes the time and effort of the volunteers trying to help you as they are then answering the same thing in different places.
Please create one topic only for your question and choose the forum category carefully. If you have multiple questions about the same project then please ask your questions in the one topic as the answers to one question provide useful context for the others, and also you won’t have to keep explaining your project repeatedly.
Repeated duplicate posting could result in a temporary or permanent ban from the forum.
Could you take a few moments to Learn How To Use The Forum
It will help you get the best out of the forum in the future.
Thank you.
This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.
