# Switching with 3V3

**URL:** <https://forum.arduino.cc/t/switching-with-3v3/675483>\
**Category:** General Electronics\
**Created:** [September 22, 2020, 9:02am UTC](https://forum.arduino.cc/t/switching-with-3v3/675483 "2020-09-22T09:02:35Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![6v6gt](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/6v6gt/32/225488_2.png) [@6v6gt](https://forum.arduino.cc/u/6v6gt)\
**Post date:** [September 22, 2020, 9:30am UTC](https://forum.arduino.cc/t/switching-with-3v3/675483/2 "2020-09-22T09:30:32Z")

</div>

From the data sheet [https://www.mouser.ch/datasheet/2/115/ds31854-88548.pdf:](https://www.mouser.ch/datasheet/2/115/ds31854-88548.pdf:)

Low On-Resistance:  
• 3.0 Ω @ 4.5V  
• 4.0 Ω @ 2.5V  
• 6.0 Ω @1.8V  
• 10 Ω @1.5V

If you need to draw the same current (which I guess from what you said is about 250mA), you have to choose a mosfet with a lower RDSon (Ohms) at 3.3volts or less.

Show your circuit diagram.

---

_[View the full topic](https://forum.arduino.cc/t/switching-with-3v3/675483)._
