TFT ILI9488 LCD

Hi,

Im using Mcufriend tft touchpad with arduino uno. As Mr david_prentice said i followed all steps to get display and touch. Display works well. but when i touch on the board it shows mirror places as shown below image. Please help me.

Making all control and bus pins INPUT_PULLUP
Typical 30k Analog pullup with corresponding pin
would read low when digital is written LOW
e.g. reads ~25 for 300R X direction
e.g. reads ~30 for 500R Y direction

Testing : (A1, D7) = 23
Testing : (A2, D6) = 41
Diagnosing as:-
XM,XP:  (A1, D7) = 23
YP,YM:  (A2, D6) = 41

Attached image

touch.jpg

Hi,
I have fixed my problem.

I edit the TouchScreen.cpp,

and change the line 157-164

This
return TSPoint(x, y, z);

to this
return TSPoint(1023-x, 1023 - y, z);

I ave the same problem,
can you please attach the sckatch, to see how you resolve this problem?

Thanks.