fungus:
Did you bother to look at the picture I posted?
yes, and imo a huge waste. your pins are too far away from the dip, the led is about 10x bigger than necessary, similar redundancy of signals as promini, and...
why go on... it could be about half that size (1/3 promini) and retain all functionality. ive done boards for t24-84 and m8-328, smd, and dip for both and never considered duplication of isp or serial pins. for my own use i prefer NO pcb at all which is not only smaller but 1/10th cost and virtually zero turnaround. regulator/cap/crystal/led and notice there are power and ground pins available for every i/o. even a few extra because you can never have too many for the peripherals. this could be done with a pcb for little size penalty but also little advantage in my case:
edit: ooops... i misread "package" in the title and realize this is really ot. sorry. but i would like to say that every application needs i/o pins but imo there is little point to resistor (or any components) on reset, duplicating isp and serial pins, and other unneeded stuff.
