I found an interesting home automation project, I copied it as this suited me perfectly in the home automation building I started.
Its from Arduino Web Server Temperature Gauges – Inside and Outside Temperatures
But it was probably more advanced than my skills, I don't be able to get it to work.
I have a web page on an SD card inserted in my Ethernet shield.
But this page does not appear in my web browser.
When I program a bit of HTML cod directly into the Arduino program to have this information appear in my web browser, so I do not think the problem is in the network connection.
My browser shows only a blank Web page.
In Arduino serial window will Ii got the message "SUCCESS - SD card initialized." and "SUCCESS - Found index.htm file."
When I put the SD card in my PC card slot I can read it properly.
Is there anyone who can help me find the error?
Uses
Arduino Uno
Ethernet shield
Firfox web browser.
Arduino IDE 1.6.5
#include <SPI.h>
#include <Ethernet.h>
#include <SD.h>
// size of buffer used to capture HTTP requests
#define REQ_BUF_SZ 50
// MAC address from Ethernet shield sticker under board
byte mac[] = { 0x00, 0xaa, 0xbb, 0xcc, 0xde, 0x02 };
IPAddress ip(192,168,0,191); // IP address, may need to change depending on network
IPAddress gateway(192,168,0,1);
IPAddress subnet(255, 255, 255, 0);
EthernetServer server(80); // create a server at port 80
File webFile; // the web page file on the SD card
char HTTP_req[REQ_BUF_SZ] = {0}; // buffered HTTP request stored as null terminated string
char req_index = 0; // index into HTTP_req buffer
void setup()
{
// disable Ethernet chip
pinMode(10, OUTPUT);
digitalWrite(10, HIGH);
Serial.begin(9600); // for debugging
// initialize SD card
Serial.println("Initializing SD card...");
if (!SD.begin(4)) {
Serial.println("ERROR - SD card initialization failed!");
return; // init failed
}
Serial.println("SUCCESS - SD card initialized.");
// check for index.htm file
if (!SD.exists("index.htm")) {
Serial.println("ERROR - Can't find index.htm file!");
return; // can't find index file
}
Serial.println("SUCCESS - Found index.htm file.");
Ethernet.begin(mac, ip, gateway, subnet); // initialize Ethernet device
server.begin(); // start to listen for clients
}
void loop()
{
EthernetClient client = server.available(); // try to get client
if (client) { // got client?
boolean currentLineIsBlank = true;
while (client.connected()) {
if (client.available()) { // client data available to read
char c = client.read(); // read 1 byte (character) from client
// buffer first part of HTTP request in HTTP_req array (string)
// leave last element in array as 0 to null terminate string (REQ_BUF_SZ - 1)
if (req_index < (REQ_BUF_SZ - 1)) {
HTTP_req[req_index] = c; // save HTTP request character
req_index++;
}
// last line of client request is blank and ends with \n
// respond to client only after last line received
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
// remainder of header follows below, depending on if
// web page or XML page is requested
// Ajax request - send XML file
if (StrContains(HTTP_req, "ajax_inputs")) {
// send rest of HTTP header
client.println("Content-Type: text/xml");
client.println("Connection: keep-alive");
client.println();
// send XML file containing input states
XML_response(client);
}
else { // web page request
// send rest of HTTP header
client.println("Content-Type: text/html");
client.println("Connection: keep-alive");
client.println();
// send web page
webFile = SD.open("index.htm"); // open web page file
if (webFile) {
while(webFile.available()) {
client.write(webFile.read()); // send web page to client
}
webFile.close();
}
}
// display received HTTP request on serial port
Serial.print(HTTP_req);
// reset buffer index and all buffer elements to 0
req_index = 0;
StrClear(HTTP_req, REQ_BUF_SZ);
break;
}
// every line of text received from the client ends with \r\n
if (c == '\n') {
// last character on line of received text
// starting new line with next character read
currentLineIsBlank = true;
}
else if (c != '\r') {
// a text character was received from client
currentLineIsBlank = false;
}
} // end if (client.available())
} // end while (client.connected())
delay(1); // give the web browser time to receive the data
client.stop(); // close the connection
} // end if (client)
}
// send the XML file containing analog value
void XML_response(EthernetClient cl)
{
int analog_val_1 = 0;
int analog_val_2 = 0;
char sample;
// get the sum of 10 samples from analog inputs 2 and 3
for (sample = 0; sample < 10; sample++) {
analog_val_1 += analogRead(2);
delay(2);
analog_val_2 += analogRead(3);
delay(2);
}
// calculate the average of the 10 samples
analog_val_1 /= 10;
analog_val_2 /= 10;
cl.print("<?xml version = \"1.0\" ?>");
cl.print("<inputs>");
// read analog pin A2
// analog_val = analogRead(2);
cl.print("<analog>");
cl.print(analog_val_1);
cl.print("</analog>");
// analog_val = analogRead(3);
cl.print("<analog>");
cl.print(analog_val_2);
cl.print("</analog>");
cl.print("</inputs>");
}
// sets every element of str to 0 (clears array)
void StrClear(char *str, char length)
{
for (int i = 0; i < length; i++) {
str[i] = 0;
}
}
// searches for the string sfind in the string str
// returns 1 if string found
// returns 0 if string not found
char StrContains(char *str, char *sfind)
{
char found = 0;
char index = 0;
char len;
len = strlen(str);
if (strlen(sfind) > len) {
return 0;
}
while (index < len) {
if (str[index] == sfind[found]) {
found++;
if (strlen(sfind) == found) {
return 1;
}
}
else {
found = 0;
}
index++;
}
return 0;
}
Thanks for all help
Bertil