Okay, I updated my Adruino board and coding. My API keys and everything are fine, but my sensor will not read. I've tried resetting this but not having any luck. Any suggestions?
#include <DHT.h>
#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ThingSpeak.h>
#define DHTPIN D5
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);
const char* ssid = "WuTangLAN";
const char* password = "spranktank7664A";
WiFiClient client;
unsigned long myChannelNumber = 386894;
const char * myWriteAPIKey = "9DAGDL2109WC8DIJ";
uint8_t temperature, humidity;
void setup()
{
Serial.begin(115200);
dht.begin();
delay(10);
// Connect to WiFi network
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED)
{
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
// Print the IP address
Serial.println(WiFi.localIP());
ThingSpeak.begin(client);
}
void loop()
{
static boolean data_state = false;
temperature = dht.readTemperature();
humidity = dht.readHumidity();
Serial.print("Temperature Value is :");
Serial.print(temperature);
Serial.println("C");
Serial.print("Humidity Value is :");
Serial.print(humidity);
Serial.println("%");
// Write to ThingSpeak. There are up to 8 fields in a channel, allowing you to store up to 8 different
// pieces of information in a channel. Here, we write to field 1.
if( data_state )
{
ThingSpeak.writeField(myChannelNumber, 1, temperature, myWriteAPIKey);
data_state = false;
}
else
{
ThingSpeak.writeField(myChannelNumber, 2, humidity, myWriteAPIKey);
data_state = true;
}
delay(30000); // ThingSpeak will only accept updates every 15 seconds.
}