Hi folks. I'm using the following code to generate a 1MHz pulse and output it at pin 13. I'm using the Arduino Uno Rev3, with an on-board 16MHz clock. This is my code: #define myOutputPin 13 int toggle = 0; void setup() { pinMode(myOutputPin, OUTPUT); cli(); TCCR1A = 0; TCCR1B = 0; TCNT1 …

Timer in CTC mode to generate 1MHz pulse

nickgammon September 9, 2012, 3:57am 3

More info:

Topic		Replies	Views
Triggering interrupts with 1200Hz Programming	6	1981	May 5, 2021
Timer1 CTC mode output problem with Mega2560 Programming	6	4301	May 5, 2021
Timer1 Interrupt Programming	8	2775	May 5, 2021
[Solved] Using Timer1 to count external source and generate waveform Programming	3	1691	May 5, 2021
easy 1MHz clock for shield? Interfacing	7	1928	May 6, 2021