Hi guys, Getting stuck here. The following code is doing everything I want it to EXCEPT initial button press. I upload the sketch to arduino and open the serial window. I press the button but nothing happens initially. I wait a few secs and press it again and it runs properly thru the case-swit…

[image] jhtoolman2000: However, it never goes thru case0... probably needs an startShow(showType); when you press the button #include <WS2812FX.h> #define LED_COUNT 182 #define LED_PIN 6 #define BTN_PIN 2 // the gpio number of the pushbutton #define TIMER_MS 3000 // cycle effects every 2 se…

Timing issue with button press

Projects Programming

jhtoolman2000 November 11, 2021, 1:46pm 6

I removed the ws2812fx.service() from the beginning, but no change

Topic		Replies	Views
Gestione button con arduino mega 2560 Italiano	19	7124	May 6, 2021
If button pressed once...If button pressed twice? General Guidance	28	36061	May 5, 2021
help Frequently-Asked Questions	31	8025	May 6, 2021
Tap-time sequencer Programming	22	1980	May 5, 2021
Consistent flash on button press (Button + FlashWithoutDelay) Programming	23	8431	May 5, 2021

Timing issue with button press

Related topics