TinyTuner not compiling

I'm having trouble with a attiny85 doing serial. After lots of reading and fuse burning I seem to have my attiny85 working but the output on my pc is garbaled. I read about tinytuner and tuning the board. I'm using Arduino IDE 1.0.3 and tinytuner-0003. When I try to compile one of the sketches in the examples directory I get the following error: (I compiled the Interactive_to_serial sketch). I have "Board" set to Attiny85 internal @8MHz

Interactive_to_Serial.pde: In function ‘void loop()’:
Interactive_to_Serial:113: error: ‘TinyTuner’ was not declared in this scope
Interactive_to_Serial:113: error: expected `;' before ‘tt’
Interactive_to_Serial:134: error: ‘tt’ was not declared in this scope

Could anybody point me in the right direction. From what I see it seems tiny tuner compiles for everybody and works as advertised.

Thanks in advance.

For those of us that don't have the example sketches could we see it please ?

#include <TinyTuner.h>
#include <avr/pgmspace.h>

const char Hello[] PROGMEM = 
"Poor Man's Tiny Tuner\r\n"
"Slowly send lowercase 'x' to tune the oscillator...\r\n\r\n";

const char StartingValue1[] PROGMEM = 
"  // Starting OSCCAL value is 0x";

const char StartingValue2[] PROGMEM = 

const char Header[] PROGMEM =
"Step  OSCCAL\r\n";

const char Bye1[] PROGMEM = 
"Copy-and-paste the following line of code at the top of setup...\r\n\r\n"
"  OSCCAL = 0x";

const char Bye2[] PROGMEM = 

const char Pad5[] PROGMEM = "     ";

void setup( void )
  Serial.begin( 9600 );
  Serial_printP( Hello );
  Serial_printP( StartingValue1 );
  Serial.print( OSCCAL, HEX );
  Serial_printP( StartingValue2 );

void loop( void )
  TinyTuner tt;
  bool KeepGoing;
  unsigned Step;

  Serial_printP( Header );
  KeepGoing = true;
  Step = 0;
  while ( KeepGoing )
    Serial.write( ' ' );
    if ( Step < 10 )
      Serial.write( ' ' );
    Serial.print( Step );
    Serial_printP( Pad5 );

    KeepGoing = tt.update();
    Serial.print( OSCCAL, HEX );
  Serial_printP( Bye1 );
  Serial.print( OSCCAL, HEX );
  Serial_printP( Bye2 );

void Serial_printP( const char* p )
  char ch;
  ch = pgm_read_byte( p );
  while ( ch != 0 )
    Serial.write( ch );
    ch = pgm_read_byte( p );

Which directory is the TinyTuner library in ?

I just unzipped the files into a temporary directory. There were no instructions to copy anything anywhere so I didn't. I did try to copy the tinytuner.cpp and tinytuner.h file into the same directory as the example code but that didn't help. I tried via the arduino IDE to "add a file" and chose the tinytuner.h file and the IDE told me that the file is already there do I want to overwrite it.

Thanks Majenko!!
It worked!