hi, uwe,
ok, ich hab' mal nur drauf geschaut, was ich so brauche (die equinox ist immer noch thema, wenn ich endlich die muße hab').
Du weißt ja, ich bin kein´elektroniker, also frag' ich halt Dich:
"Each LED output can be off or on (no PWM control), or set at its individual PWM controller
value. The LED output driver is programmed to be either open-drain with a 25 mA current
sink capability at 5 V or totem pole with a 25 mA sink, 10 mA source capability at 5 V. The
PCA9685 operates with a supply voltage range of 2.3 V to 5.5 V and the inputs and
outputs are 5.5 V tolerant. LEDs can be directly connected to the LED output (up to
25 mA, 5.5 V) or controlled with external drivers and a minimum amount of discrete
components for larger current or higher voltage LEDs."
heißt das, daß man 5050er RGB-LEDs direkt anschließen kann, wenn man den PCA9685 mit z.b. 2,3V versorgt (natürlich zu beachten, daß die verschiedenen farben unterschiedliche spannungen brauchen können)? oder, da kommt wieder der laie, kann ich den PCA9685 mit 5V betreiben, weil ja die 25mA konstantstrom sind (gott, wenn ich das endlich raffen würde)
liebe grüße, stefan?