Hi everyone it´s my first time here,
As the tittle says, I´m trying to connect my MKR 1500 Nb to Arduino cloud by this page:
I have inserted the SIM and I try to write APM, PIN (i have deactivated) username and password and neither of this combinations work, I´m unable to connect to the Arduino Cloud.
Can somebody help me?
Same problem, you found the solution? Anyone can help?
Same problem as well.
The sim and board seem to be working fine. Can't get through setup when adding new device. Please help!
M-Center Log:
[12:39:45.406] rx: AT+CGDCONT?
[12:39:45.421] tx:
[12:39:45.421] tx: +CGDCONT: 1,"IP","prepay.pelion","xx.xx.xx.xx",0,0,0,0 (I Masked IP Address)
[12:39:45.421] tx:
[12:39:45.421] tx: OK
[12:40:50.093] rx: AT+COPS?
[12:40:50.115] tx:
[12:40:50.115] tx: +COPS: 0,0,"AT&T Jsy Tel",8
[12:40:50.130] tx:
[12:40:50.130] tx: OK
[12:42:20.950] rx: AT+CSQ
[12:42:20.981] tx:
[12:42:20.981] tx: +CSQ: 19,99
[12:42:20.981] tx:
[12:42:20.981] tx: OK
[12:44:15.625] rx: AT+UGAOP="eval1-les.services.u-blox.com",46434,1000,0
[12:44:15.693] tx:
[12:44:15.709] tx: +CME ERROR: Operation n
[12:44:15.725] tx: ot supported
[12:44:15.725] tx:
[12:44:15.771] rx: AT+ULOCCELL=0
[12:44:15.787] tx:
[12:44:15.787] tx: ERROR
[12:44:15.856] rx: AT+ULOC=2,2,1,100,5000
[12:44:15.856] tx:
[12:44:15.856] tx: OK
[12:45:56.147] tx:
[12:45:56.147] tx: +UULOC: 15/05/2020,19:38:49.000,0.0000000,0.0000000,0,20000000,0,0
[12:45:56.163] tx: ,0,0,0,0,0
[12:47:15.999] rx: AT+CGMM
[12:47:16.068] tx:
[12:47:16.068] tx: SARA-R410M-02B
[12:47:16.068] tx:
[12:47:16.068] tx: OK
[12:47:20.708] rx: AT+CGMR
[12:47:20.734] tx:
[12:47:20.734] tx: L0.0.00.00.05.06 [Feb 03 2018 13:00:41]