# Trying to detect SMBus device with I2C detect

**URL:** <https://forum.arduino.cc/t/trying-to-detect-smbus-device-with-i2c-detect/1007856>\
**Category:** General Guidance\
**Created:** [June 29, 2022, 3:08pm UTC](https://forum.arduino.cc/t/trying-to-detect-smbus-device-with-i2c-detect/1007856 "2022-06-29T15:08:04Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![pemitchell2](https://avatars.discourse-cdn.com/v4/letter/p/b9e5f3/32.png) [@pemitchell2](https://forum.arduino.cc/u/pemitchell2)\
**Post date:** [June 29, 2022, 4:55pm UTC](https://forum.arduino.cc/t/trying-to-detect-smbus-device-with-i2c-detect/1007856/7 "2022-06-29T16:55:00Z")

</div>

![image](https://europe1.discourse-cdn.com/arduino/original/4X/e/5/a/e5a9b449ad1e98fe351dee8ceef5f0aebc4a5650.png)

The best information I can find on this battery is that it complies with all of the SMBus v1.1 standards. According to the SMBus v1.1 manual, the bus is "designed to operate over a range of voltages between 3 and 5 Volts +/- 10%." That makes me think the Uno's I2C Bus should be ok, no?

The battery is fully charged (according to the little LCD display on top of it).

I have not tested the Uno with any other I2C devices, unfortunately. I may be able to drum something up just to test it. I'll get back to you on that.

---

_[View the full topic](https://forum.arduino.cc/t/trying-to-detect-smbus-device-with-i2c-detect/1007856)._
