I am powering it with 2 750mAh 1S 35-70C lipos in series to get it running at 7.4-8.4V, then using a voltage divider with r1 being 47ohms and r2 being 100ohms the servo gets about 5.5V. I am using a ATtiny85 to control the servo (I am fairly sure that I have done everything correctly with that as if…

Turnigy TGY-4409md Servo on Attiny85 - HELP - #9 by system - General Guidance

Topic		Replies	Views	Activity
Strnge behaviour of Mini Servo Motors, Mechanics, Power and CNC	6	1777	May 6, 2021
ATTiny85 + transitor servo control 3rd Party Boards	5	3163	May 6, 2021
4.5v AtMega with 5v FTDI Development	13	5313	May 6, 2021
Powering a servo externally through a voltage divider General Electronics	9	4754	May 6, 2021
External Power Supply to Servo General Guidance	8	2083	May 5, 2021