Typo on Arduino ZERO page - Burn the Bootloader

Hi there,

Just investigating on the bootloader burning proces.

Burn the Bootloader
Using the Zero Programming Port it is possible to burn the booloader used by the Native USB port. To burn the bootloader follow this procedure:
select Tools->Programmer->Atmel EDBG
select Tools->Board->Arduino/Genuino Zero (Programming Port)
select Tools->Burn Bootloader

https://www.arduino.cc/en/Main/ArduinoBoardZero

This is contradictory: Native USB <-> Programming USB

I tried the native usb port but only the programming USB works.

Thanks! :art: