U8glib and SSD1306 I2C

Other Hardware Displays
19

olikraus:
Hi

So far all of my SSD1306 and SSH1106 OLEDs from Ebay (SPI and I2C variants) did work with u8glib. Should be about 10 different displays so far. I never had to change the I2C address.

Oliver

I picked up one of these displays: White 3-5V 0.96" SPI Serial 128X64 OLED LCD LED Display Module for Arduino | eBay

It says it can be Spi or I2c. I set it up as I2C but when using the i2c scanner on a nano I do not see it.
It uses the ssd1306 also.

Has anybody used one of these.?? I am not sure if I have it hooked up correctly.

My info is: D0=SCL, D1=SDA, Res pulled high, DC pulled high, CS pulled low.

Tnx for any info. Mike.