I got the "Alice" display to work in I2C mode.
Here's how I set it up:
R1 = solder bridge
R2 = open
R3 = open
R4 = solder bridge
R5 = original 910K
R6 = original 4.7K
R7 = original 4.7K
R8 = solder bridge
Pin connections (Arduino - OLED):
GND - GND
5V - VCC
A5/SCL - D0
A4/SDA -D1
D9 - RES (could use any digital pin)
DC - VCC (address = 0x3D; or DC - GND for 0x3C)
CS - GND