Am trying to troubleshoot why my computer isn't recognizing the CP2102N as COM Port. I have tried two different computers, one PC and one Mac, different cables, uninstalling and reinstalling the drivers. I've attached the board schematic below. Here is the link to the IC itself. Not sure what my other options to troubleshoot can be. I've ordered the generic Xbee to usb converter off of amazon to see if it works to either narrow down the issue to my hardware or computer. The purpose of this board is to allow three different power sources to the XBEE; 3.3V, 5V, and 5V via USB. Both the 5V would go through the Vreg to bring it to 3.3V. Only time USB would be used it to configure the XBEE which interfaces via header pins. Only one power source would be supplied at a time.
Update: From a previous thread that had to be deleted, unsoldered the LED/resistors and the issue still persists. (R1/R2/R3/R4/R5/R6)
XBee Adapter Board v1.pdf (20.5 KB)