# Unable to connect my Arduino anymore to Cloud Editor

**URL:** <https://forum.arduino.cc/t/unable-to-connect-my-arduino-anymore-to-cloud-editor/1425333>\
**Category:** Cloud Editor\
**Created:** [January 14, 2026, 8:50pm UTC](https://forum.arduino.cc/t/unable-to-connect-my-arduino-anymore-to-cloud-editor/1425333 "2026-01-14T20:50:48Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![amayrthecrown](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/amayrthecrown/32/1255668_2.png) [@amayrthecrown](https://forum.arduino.cc/u/amayrthecrown)\
**Post date:** [January 14, 2026, 8:50pm UTC](https://forum.arduino.cc/t/unable-to-connect-my-arduino-anymore-to-cloud-editor/1425333/1 "2026-01-14T20:50:48Z")

</div>

Sorry if I am not posting correctly as it is my first time. I am using an **Arduino Nano 33 BLE Rev2** that I bought recently, it was working completely fine for the first few weeks, however I stopped working on it for a few days and when I came back to use it, it wasnt connecting at all.

The main issue I have is that the arduino cloud editor which i am using to code, isnt detecting my board properly anymore. Before it used to work perfectly fine and I was able to upload code and use the board (via serial USB), it even had the name correctly! But now when i try and connect it is showing as an arduino stella and it isnt connecting properly. I dont have any external wires and I haven't changed anything about the board at all. I have also been using the same Micro Usb cable the entire time.

I have already tried pressing the button twice to make it into bootloader mode, and that still didnt work, I even tried switching laptops and that didn't work either.

I am very new to all this arduino stuff so I have no idea what to do.

---

<div class="post-metadata">

**Author:** ![xfpd](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/xfpd/32/1120236_2.png) [@xfpd](https://forum.arduino.cc/u/xfpd)\
**Post date:** [January 16, 2026, 3:22am UTC](https://forum.arduino.cc/t/unable-to-connect-my-arduino-anymore-to-cloud-editor/1425333/2 "2026-01-16T03:22:19Z")

</div>

Verify the cable is a data cable.

---

<div class="post-metadata">

**Author:** ![amayrthecrown](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/amayrthecrown/32/1255668_2.png) [@amayrthecrown](https://forum.arduino.cc/u/amayrthecrown)\
**Post date:** [January 16, 2026, 10:40am UTC](https://forum.arduino.cc/t/unable-to-connect-my-arduino-anymore-to-cloud-editor/1425333/3 "2026-01-16T10:40:00Z")

</div>

I have been using the same cable so it worked before.

---

<div class="post-metadata">

**Author:** ![xfpd](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/xfpd/32/1120236_2.png) [@xfpd](https://forum.arduino.cc/u/xfpd)\
**Post date:** [January 16, 2026, 3:21pm UTC](https://forum.arduino.cc/t/unable-to-connect-my-arduino-anymore-to-cloud-editor/1425333/4 "2026-01-16T15:21:11Z")

</div>

> [@amayrthecrown](#):
>
> arduino cloud editor which i am using to code, isnt detecting my board properly

Did you try this short page:  
[https://support.arduino.cc/hc/en-us/articles/360018131160-If-your-board-is-not-detected-by-Arduino-Cloud-Editor](https://support.arduino.cc/hc/en-us/articles/360018131160-If-your-board-is-not-detected-by-Arduino-Cloud-Editor)

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [July 15, 2026, 3:21pm UTC](https://forum.arduino.cc/t/unable-to-connect-my-arduino-anymore-to-cloud-editor/1425333/5 "2026-07-15T15:21:46Z")

</div>

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.