# Unable to install the ESPAsyncHTTPUpdateServer v3.0.0 library

**URL:** <https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714>\
**Category:** IDE 2.x\
**Created:** [November 14, 2026, 10:10pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714 "2026-11-14T22:10:38Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![BitSeeker](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bitseeker/32/1241632_2.png) [@BitSeeker](https://forum.arduino.cc/u/BitSeeker)\
**Post date:** [November 14, 2026, 10:10pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/1 "2026-11-14T22:10:38Z")

</div>

Because I am trying to use ESPAsyncWebserver, I have found that in order to do OTA updates, it is neccessary to also use ESPAsyncHTTPUpdateServer. However, when I try to install the ESPAsyncHTTPUpdateServer library (v3.0.0) I get this error message:

```arduino
Failed to install library: 'ESPAsyncHTTPUpdateServer:3.0.0'. No valid dependencies solution found

```

Not come across this one before. Any ideas why its saying there are no valid dependencies?

I was able to install the older version 2.0.0 library, but when I hit the `Update` button I get the same error.

---

<div class="post-metadata">

**Author:** ![BitSeeker](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bitseeker/32/1241632_2.png) [@BitSeeker](https://forum.arduino.cc/u/BitSeeker)\
**Post date:** [November 14, 2026, 10:27pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/3 "2026-11-14T22:27:23Z")

</div>

Sorry, don't understand the reason for your question?

Its a library available via the Arduino IDE. Are ESP32 questions not permitted here?

(If not, then I will raise an issue on the Github repository for ESPAsyncHTTPUpdateServer).

---

<div class="post-metadata">

**Author:** ![Railroader](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/railroader/32/274550_2.png) [@Railroader](https://forum.arduino.cc/u/Railroader)\
**Post date:** [November 14, 2026, 10:28pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/4 "2026-11-14T22:28:27Z")

</div>

> [@BitSeeker](#):
>
> Its a library available via the Arduino IDE

I'm sorry, I mad a mistake and erase the reply.

---

<div class="post-metadata">

**Author:** ![BitSeeker](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bitseeker/32/1241632_2.png) [@BitSeeker](https://forum.arduino.cc/u/BitSeeker)\
**Post date:** [November 14, 2026, 10:33pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/5 "2026-11-14T22:33:12Z")

</div>

No worries. I will raise an issue on the authors Github anyway to make them aware.

Thinking a bout it, I guess its kind of a fair point, since there is no ESP32 category (presumably since its not an Arduino branded board) and I don't think the library applies to an Arduino board (except possibly the Arduino Nano ESP32?). Would be interested to know actually whether and where ESP32 questions fit on the forum.

---

<div class="post-metadata">

**Author:** ![Railroader](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/railroader/32/274550_2.png) [@Railroader](https://forum.arduino.cc/u/Railroader)\
**Post date:** [November 14, 2026, 10:47pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/6 "2026-11-14T22:47:10Z")

</div>

> [@BitSeeker](#):
>
> there is no ESP32 category

I've never used an ESP controller but from posts made here I've understood there is one special ESP that has a special category. Most other boards are handled in "Project.....".

Reading the category description/help usually guides You.

---

<div class="post-metadata">

**Author:** ![Deva\_Rishi](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/deva_rishi/32/227254_2.png) [@Deva\_Rishi](https://forum.arduino.cc/u/Deva_Rishi)\
**Post date:** [November 15, 2026, 12:00am UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/7 "2026-11-15T00:00:45Z")

</div>

> [@BitSeeker](#):
>
> ESP32 category (presumably since its not an Arduino branded board) and I don't think the library applies to an Arduino board

That is no reason to exclude a library. There is a chance something else has gone wrong on the github side. It is fine to add libraries to the library manager even if they can only be used by a board or processor that isn't an actual Arduino board, but for the library to install properly there are other criteria and possibly those aren't met. Find it on github, do a manual install if you want to use it and raise the issue with the developers. If manual install also doesn't work, raise that as an issue i guess.

---

<div class="post-metadata">

**Author:** ![kenb4](https://avatars.discourse-cdn.com/v4/letter/k/bb73d2/32.png) [@kenb4](https://forum.arduino.cc/u/kenb4)\
**Post date:** [November 15, 2026, 12:33am UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/8 "2026-11-15T00:33:49Z")

</div>

The dependencies for ESPAsyncHTTPUpdateServer (last line):

> <https://github.com/IPdotSetAF/ESPAsyncHTTPUpdateServer/blob/v3.0.0/library.properties#L12>

For that dependency, ESPAsyncWebServer:

 ![only one version](https://europe1.discourse-cdn.com/arduino/original/4X/4/8/7/487dd7cd3e6df1f7106a1cc3a98a2303e3baac22.png)  
there is only one published version, `3.1.0` -- which does not qualify as `(>=3.7.4)`. That's the error.

If you visit that More Info link, you'll see that repository has been archived. At some point not too long ago, it seems like that entire effort moved into a new repository (under a new GitHub organization). It's also listed in the Library Manager. The name now has (two, not three) spaces:

 ![with spaces](https://europe1.discourse-cdn.com/arduino/original/4X/4/a/c/4ac948bf3aaa3d271a02ee622d0afeae48b0f934.png)  
I happen to have the exact minimum version installed on this box. Here's that official name in the new repository, for the latest published version (first line):

> <https://github.com/ESP32Async/ESPAsyncWebServer/blob/v3.12.1/library.properties#L1>

So the fix might be to add two spaces on that `depends` line. Until that happens officially, you might get around it by downloading the [release .zip](https://github.com/IPdotSetAF/ESPAsyncHTTPUpdateServer/archive/refs/tags/v3.0.0.zip) and manually unzipping it in your sketchbook's `/libraries` subdirectory. Conveniently, all the content in that .zip is under a single directory, `ESPAsyncHTTPUpdateServer-3.0.0`, which has the version number appended. Normal library subdirectories don't. Then restart the IDE if it's already running.

It shows up in the Examples (under the File menu), and the sole example, **simple\_server** , compiled for me. (I already had the minimum dependency installed.)

---

<div class="post-metadata">

**Author:** ![BitSeeker](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bitseeker/32/1241632_2.png) [@BitSeeker](https://forum.arduino.cc/u/BitSeeker)\
**Post date:** [November 15, 2026, 10:44am UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/9 "2026-11-15T10:44:22Z")

</div>

@kenb4 thank you for the detailed reply. I wasn't sure where the dependencies are listed, so thank you for pointing that out.

As for ESP Async Webserver, I initially saw only one installed entry in the IDE and that is for version 3.12.1. However, when I removed the spaces, I also found ESPAsyncWebServer by lacamera version 3.1.0 installed.

Simply removing version 3.1.0 does not allow ESPAsyncHTTPUpdateSerer v3.0.0 to be installed, likely because of the additional spaces as you suggest.

I will try a manual install later and see how that goes.

Thanks.

PS. I have raised an issue on the with the developers on the Github repository and provided a link to post #8 for a possible solution.

---

<div class="post-metadata">

**Author:** ![bidrohini](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bidrohini/32/1126551_2.png) [@bidrohini](https://forum.arduino.cc/u/bidrohini)\
**Post date:** [November 15, 2026, 3:18pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/10 "2026-11-15T15:18:06Z")

</div>

That explains why removing version 3.1.0 didn’t help: the installer is still looking for a library named **`ESPAsyncWebServer`** , while your installed 3.12.1 library identifies itself as **`ESP Async WebServer`**.

The dependency declaration should therefore be:

```arduino
depends=ESP Async WebServer (>=3.7.4)

```

Arduino’s [library specification](https://docs.arduino.cc/arduino-cli/library-specification/#libraryproperties-file-format) explicitly allows spaces in dependency names. The header remains `ESPAsyncWebServer.h`; there’s no need to change your sketch’s `#include`.

For the manual installation kenb4 suggested:

1. Keep **ESP Async WebServer 3.12.1 by ESP32Async** installed.
2. Extract the update-server release ZIP into your configured sketchbook’s `libraries` directory. Ensure `library.properties` is directly inside the extracted library folder, without an extra enclosing folder.
3. Restart the IDE and try compiling `simple_server` for your board.

That follows Arduino’s [manual installation procedure](https://support.arduino.cc/hc/en-us/articles/5145457742236-Install-libraries-in-the-Arduino-IDE#manual-installation). You’ll need any remaining dependencies installed separately.

If compilation reports multiple matches for `ESPAsyncWebServer.h`, check the **“Used”** path in the output to confirm it selected the ESP32Async version.

Reporting this upstream was the right step. A corrected release needs to reach the Library Manager index to fix automatic installation; changing a locally extracted copy won’t repair the metadata of the published v3.0.0 package.

---

<div class="post-metadata">

**Author:** ![BitSeeker](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bitseeker/32/1241632_2.png) [@BitSeeker](https://forum.arduino.cc/u/BitSeeker)\
**Post date:** [November 15, 2026, 4:27pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/11 "2026-11-15T16:27:21Z")

</div>

I have installed the ESPAsyncHTTPUpdateServer version 3.0.0 library manually as per instructions. I am now getting this error:

```arduino
In file included from /mnt/ntfs/Data/Data/Programming/Arduino/Bathroom-Fan-Control/Bathroom-Fan-Control-v2/Bathroom-Fan-Control-v2.ino:30:
/home/johnc/Data/Data/Programming/Arduino/libraries/ESP_Async_WebServer/src/ESPAsyncWebServer.h:43:10: fatal error: AsyncTCP.h: No such file or directory
   43 | #include <AsyncTCP.h>
      | ^ ~~~~~~~~~~~
compilation terminated.
exit status 1

```

So it seems there are missing dependencies in the ESPAsyncWebserver library. I have tried removing and re-installing, but it seems I didn't miss any warning about installing with or without dependencies.

If I go to install Async TCP, there are two versions: AsyncTCP by dvarrel v 1.1.4, and also Async TCP by ESP32Async v 3.6.1. Seems the former has not been updated for 4 years so the latter is probably the one to use?

It seems that there is also a library called AsyncEspFsWebserver, with nice built-in /setup and /edit pages so who knows which is the correct version to use....

I am curious, since the ESPAsyncHTTPUpdateServer library hasn't been updated since last year, it doesn't seem likely that this has gone unnoticed for so long, which would tend to suggest that nobody is using it?

The only reason why I am trying to use it is because all of the examples I encounter seem to use this Async version of the ESP webserver library. My original ESP8266 code did not use Async code and I would be happy NOT to use it if I could find examples of how to structure the server.on statements to serve files from the LittleFS volume.

Is it the general wisdom to use Async versions nowadays? What's the advantage? I see only significant disadvantage due to the added complexity.

---

<div class="post-metadata">

**Author:** ![Deva\_Rishi](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/deva_rishi/32/227254_2.png) [@Deva\_Rishi](https://forum.arduino.cc/u/Deva_Rishi)\
**Post date:** [November 15, 2026, 5:13pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/12 "2026-11-15T17:13:14Z")

</div>

> [@BitSeeker](#):
>
> Is it the general wisdom to use Async versions nowadays?

I never do.

> [@BitSeeker](#):
>
> What's the advantage?

With the ESP32, if the Async versions exploit RTOS and are task based, there could be a speed benefit. For an ESP8266 the difference in method was just that the call to handle() was automatic at the end of loop(), so not really any benefit.

---

<div class="post-metadata">

**Author:** ![BitSeeker](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bitseeker/32/1241632_2.png) [@BitSeeker](https://forum.arduino.cc/u/BitSeeker)\
**Post date:** [November 16, 2026, 12:49pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/13 "2026-11-16T12:49:11Z")

</div>

I installed the newer 'Async TCP', i.e the one with the space in between and that seems to have satisfied the compiler. I am now having some difficulty understanding the Async library calls and syntax which I have made the subject of another discussion.

Thank you for the assistance with this library.

---

<div class="post-metadata">

**Author:** ![IPdotSetAF](https://avatars.discourse-cdn.com/v4/letter/i/4da419/32.png) [@IPdotSetAF](https://forum.arduino.cc/u/IPdotSetAF)\
**Post date:** [November 19, 2026, 8:27pm UTC](https://forum.arduino.cc/t/unable-to-install-the-espasynchttpupdateserver-v3-0-0-library/1467714/14 "2026-11-19T20:27:47Z")

</div>

Hey there.

I just released v3.0.1 of the library. this should fix the issue.

[Release v3.0.1 · IPdotSetAF/ESPAsyncHTTPUpdateServer · GitHub](https://github.com/IPdotSetAF/ESPAsyncHTTPUpdateServer/releases/tag/v3.0.1)

> <https://github.com/IPdotSetAF/ESPAsyncHTTPUpdateServer/issues/37>
>
> I am using Arduino IDE version 2.3.10 and am unable to install version 3.0.0 of …this library. I am running the Arduino IDE on the MX Linux 25.3. The IDE package has been downloaded from arduino.cc.
> 
> I get the following error: 
> 
> \`Failed to install library: 'ESPAsyncHTTPUpdateServer:3.0.0'. No valid dependencies solution found\`
> 
> If I use the dropdown and select version 2.0.0, this installs fine and prompts me also to install dependencies. If I then try to update to version 3.0.0 I get the same error.

> <https://github.com/IPdotSetAF/ESPAsyncHTTPUpdateServer/pull/38>
>
> Refs #37.
> 
> The published 3.0.0 entry requires \`ESPAsyncWebServer (\>=3.7.4)\`, but… that indexed name only has version 3.1.0. Use the ESP32Async package name \`ESP Async WebServer\` and keep the existing version constraint. The install note lists the TCP packages for ZIP installs. Library Manager users will need a new indexed release.
> 
> Arduino CLI 1.6.0 reproduced the install error with the published index. A local index copy with the corrected name resolves to \`ESP Async WebServer\` 3.12.1. \`simple\_server\` compiled with ESP8266 core 3.1.2. The ESP32 3.3.13 build timed out.
> 
> I work on Visual Micro. Our \[Library Manager guide\](https://www.visualmicro.com/page/User-Guide.aspx?doc=Library-Manager.html#library-names-and-dependencies) explains this name mismatch for readers diagnosing the error.
