UNO+WiFi R3 ATmega328P+ESP8266, 32Mb flash, USB-TTL CH340G, Micro-USB

Community General Discussion
1

Hello

Recently I purchased UNO+WiFi R3 ATmega328P+ESP8266 board and set the dip switches as mentioned on RobotDyn except for CH340 connect to ESP8266 (upload sketch) 5,6,7 non other seems to work. I went through almost every post on google, but cant find any help.

I just simply want to upload the simple blink example to see it work. If this works then any other sketch will work, But still I am unable to upload the sketch.

I've been using WeMos D1 R1 and it works great. Sometimes I think I must shift back, but still wanted to try the UNO+WiFi R3 ATmega328P+ESP8266. Can anyone help me harness the board.

Thanks and Regards

Tayyab Hussain

2

only switches 1,2 ON should allow upload to Atmega. did you choose Uno as board for that?

3

Hi-

Extremely sorry for the late reply, Yes i chosed UNO+WiFi R3 ATmega328P+ESP8266 from RobotDyn. I tried that too but still not working.

Regards

Tayyab Hussain

4

my question was about board selection in IDE menu Tools