Hey, I am working with Lolin S2 Mini board and I've been getting this error since the beginning of my work. Somehow I resolved it once, but in a way of troubleshooting another problem, I reinstalled Arduino IDE and the initial problem came back. Of course, using the boot and reset buttons to manual…

Hi @greg028 . I'm going to ask you to post the full verbose output from an upload attempt. :exclamation: This procedure is not intended to solve the problem. The purpose is to gather more information. Please do this: Select File > Preferences... (or Arduino IDE > Settings... for macOS users) fr…

Sorry for the long wait, here's the code: Sketch uses 246538 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 26252 bytes (8%) of dynamic memory, leaving 301428 bytes for local variables. Maximum is 327680 bytes. Performing 1200-bps touch reset on serial port /de…

You can see here that the esptool tool used to upload sketches to the ESP32-S2 prints a warning that you must manually reset the board in order to start the sketch after the upload: [image] greg028: WARNING: ESP32-S2FNR2 (revision v0.0) chip was placed into download mode using GPIO0. esptool.py…

Upload to ESP32-S2 board fails: "WARNING: ESP32-S2FNR2 (revision v0.0) chip was placed into download mode using GPIO0."

Development Tools Uploading

Topic		Replies	Views
Aeduino IDE and ESP32-S2 Mini Programming	0	238	May 4, 2024
Connection problem with ESP32S2 mini General Guidance	5	1640	January 25, 2024
ESP32-S2 Mini: Error trying to compile and upload any code Uploading	13	456	September 9, 2025
Problems uploading to ESP32 using arduino 2.3.6 Uploading	24	491	October 4, 2025
Something with the ESP32loading Uploading	12	231	April 28, 2026

Upload to ESP32-S2 board fails: "WARNING: ESP32-S2FNR2 (revision v0.0) chip was placed into download mode using GPIO0."

Related topics