Upload to Mini failure through FDT232
Pro Mini 5vdc
On the ftd232 only the red LED flashes, and only ocassionaly (sp?) (see image below)
Sample of error messages ==
'avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x7a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x7a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x7a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x7a
Failed uploading: uploading error: exit status 1'
MINI FTD232
“BLK” --- GND
GND --- CTS
VCC --- VCC
RX0 --- RX0
TX0 --- TX0
“GRN” --- DTR
