Hey I recently got an Arduino BT from sparkfun along with a bluetooth dongle and after installing the software that came with the bluetooth dongle and setting the arduino IDE to the correct com port and board type when I attempt to upload a sketch i get this error:
avrdude: Version 5.4-arduino, compiled on Oct 11 2007 at 19:12:32 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "C:\Documents and Settings\Owner\Desktop\arduino-0012-win\arduino-0012\hardware/tools/avr/etc/avrdude.conf"
Using Port : \.\COM10 Using Programmer : stk500v1 Overriding Baud Rate : 19200 avrdude: ser_open(): setting dtr avrdude: Send: 0   avrdude: Send: 0   avrdude: Send: 0   avrdude: Recv: avrdude: stk500_getsync(): not in sync: resp=0x00 avrdude: Send: Q   avrdude: Recv: avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51
avrdude done. Thank you.