USB Host Shield "OSC did not start"

Projects General Guidance
1

I have recently bought an Arduino Uno and a USB Host Shield 2.0. I have soldered the 3 necessary pins so that my mouse could receive power from the Arduino Uno Board. However, when I am compiling the USBHIDBootMouse sketch, the serial monitor mentioned "OSC did not start" instead of showing me the X,Y coordinate of the mouse.

Serial Monitor
Serial Monitor

Arduino Uno & USB Host Shield 2.0

[Album] Arduino Uno & USB Host Shield 2.0

USBHIDBootMouse.ino

#include <hidboot.h>
#include <usbhub.h>

// Satisfy the IDE, which needs to see the include statment in the ino too.
#ifdef dobogusinclude
#include <spi4teensy3.h>
#endif
#include <SPI.h>

class MouseRptParser : public MouseReportParser
{
protected:
	void OnMouseMove	(MOUSEINFO *mi);
	void OnLeftButtonUp	(MOUSEINFO *mi);
	void OnLeftButtonDown	(MOUSEINFO *mi);
	void OnRightButtonUp	(MOUSEINFO *mi);
	void OnRightButtonDown	(MOUSEINFO *mi);
	void OnMiddleButtonUp	(MOUSEINFO *mi);
	void OnMiddleButtonDown	(MOUSEINFO *mi);
};
void MouseRptParser::OnMouseMove(MOUSEINFO *mi)
{
    Serial.print("dx=");
    Serial.print(mi->dX, DEC);
    Serial.print(" dy=");
    Serial.println(mi->dY, DEC);
};
void MouseRptParser::OnLeftButtonUp	(MOUSEINFO *mi)
{
    Serial.println("L Butt Up");
};
void MouseRptParser::OnLeftButtonDown	(MOUSEINFO *mi)
{
    Serial.println("L Butt Dn");
};
void MouseRptParser::OnRightButtonUp	(MOUSEINFO *mi)
{
    Serial.println("R Butt Up");
};
void MouseRptParser::OnRightButtonDown	(MOUSEINFO *mi)
{
    Serial.println("R Butt Dn");
};
void MouseRptParser::OnMiddleButtonUp	(MOUSEINFO *mi)
{
    Serial.println("M Butt Up");
};
void MouseRptParser::OnMiddleButtonDown	(MOUSEINFO *mi)
{
    Serial.println("M Butt Dn");
};

USB     Usb;
USBHub     Hub(&Usb);
HIDBoot<USB_HID_PROTOCOL_MOUSE>    HidMouse(&Usb);

MouseRptParser                               Prs;

void setup()
{
    Serial.begin( 115200 );
#if !defined(__MIPSEL__)
    while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
#endif
    Serial.println("Start");

    if (Usb.Init() == -1)
        Serial.println("OSC did not start.");

    delay( 200 );

    HidMouse.SetReportParser(0, &Prs);
}

void loop()
{
  Usb.Task();
}
2

Your topic has been moved to a more suitable location on the forum. Installation and Troubleshooting is not for problems with (nor for advice on) your project :wink: See About the Installation & Troubleshooting category.

Please post YOUR sketch, not evevrybody knows the USBHIDBootMouse sketch. When posting code, please use code tags as described in How to get the best out of this forum.

Please post images in a post, not as a link to an external site. It's easy, you can drop an image in the reply window on the forum.

Please do not post images of text; you can copy from serial monitor and paste here in a reply (again using code tags).

4

The 5V and 3.3V pad soldering is not good. Redo the soldering. Look for a soldering tutorial.

Since the 5V appears to be working (the mouse LED is on), use a multimeter to verify 3.3V is working.