Danke für die schnelle Antwort aber ich komme einfach nicht weiter.
Ich hätte noch eine Frage:
Damit ich die ISP Clock ändern kann muss ich bei avrdude die Option -B hinzufügen aber wo mache ich das.
Hier sind noch Auszüge aus der gesammten Meldung wenn ich den Bootloader hinaufspielen möchte:
C:\Arduino\arduino-1.0.1\hardware/tools/avr/bin/avrdude -CC:\Arduino\arduino-1.0.1\hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega328p -cstk500v2 -P\\.\COM3 -e -Ulock:w:0x3F:m -Uefuse:w:0x05:m -Uhfuse:w:0xde:m -Ulfuse:w:0xff:m
avrdude: Version 5.11, compiled on Sep 2 2011 at 19:38:36
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "C:\Arduino\arduino-1.0.1\hardware/tools/avr/etc/avrdude.conf"
Using Port : \\.\COM3
Using Programmer : stk500v2
avrdude: Send: . [1b] . [01] . [00] . [01] . [0e] . [01] . [14]
avrdude: Recv: . [1b]
avrdude: Recv: . [01]
avrdude: Recv: . [00]
avrdude: Recv: . [0b]
avrdude: Recv: . [0e]
avrdude: Recv: . [01]
avrdude: Recv: . [00]
avrdude: Recv: . [08]
avrdude: Recv: S [53]
avrdude: Recv: T [54]
avrdude: Recv: K [4b]
avrdude: Recv: 5 [35]
avrdude: Recv: 0 [30]
avrdude: Recv: 0 [30]
avrdude: Recv: _ [5f]
avrdude: Recv: 2 [32]
avrdude: Recv: . [02]
avrdude: stk500v2_getsync(): found STK500 programmer
AVR Part : ATMEGA328P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel STK500 Version 2.x firmware
Programmer Model: STK500
avrdude: Send: . [1b] . [02] . [00] . [02] . [0e] . [03] . [90] . [86]
avrdude: Recv: . [1b]
avrdude: Recv: . [02]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: . [0a]
avrdude: Recv: . [1d]
avrdude: Send: . [1b] . [03] . [00] . [02] . [0e] . [03] . [91] . [86]
avrdude: Recv: . [1b]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: . [02]
avrdude: Recv: . [14]
avrdude: Send: . [1b] . [04] . [00] . [02] . [0e] . [03] . [92] . [82]
avrdude: Recv: . [1b]
avrdude: Recv: . [04]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: . [0a]
avrdude: Recv: . [1b]
Hardware Version: 10
Firmware Version Master : 2.10
avrdude: Send: . [1b] . [05] . [00] . [02] . [0e] . [03] . [9a] . [8b]
avrdude: Recv: . [1b]
avrdude: Recv: . [05]
avrdude: Recv: . [00]
avrdude: Recv: . [02]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [c0]
avrdude: Recv: . [d1]
avrdude: stk500v2_command(): command failed
avrdude: stk500v2_getparm(): failed to get parameter 0x9a
Topcard : Unknown
avrdude: Send: . [1b] . [06] . [00] . [02] . [0e] . [03] . [94] . [86]
avrdude: Recv: . [1b]
avrdude: Recv: . [06]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: 2 [32]
avrdude: Recv: ! [21]
Vtarget : 5.0 V
avrdude: Send: . [1b] . [07] . [00] . [02] . [0e] . [03] . [98] . [8b]
avrdude: Recv: . [1b]
avrdude: Recv: . [07]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [11]
avrdude: Send: . [1b] . [08] . [00] . [02] . [0e] . [03] . [95] . [89]
avrdude: Recv: . [1b]
avrdude: Recv: . [08]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: 2 [32]
avrdude: Recv: / [2f]
avrdude: Send: . [1b] . [09] . [00] . [02] . [0e] . [03] . [96] . [8b]
avrdude: Recv: . [1b]
avrdude: Recv: . [09]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: . [00]
avrdude: Recv: . [1c]
avrdude: Send: . [1b] . [0a] . [00] . [02] . [0e] . [03] . [97] . [89]
avrdude: Recv: . [1b]
avrdude: Recv: . [0a]
avrdude: Recv: . [00]
avrdude: Recv: . [03]
avrdude: Recv: . [0e]
avrdude: Recv: . [03]
avrdude: Recv: . [00]
avrdude: Recv: . [00]
avrdude: Recv: . [1f]
SCK period : 3.3 us
Varef : 5.0 V
Oscillator : Off
avrdude: Send: . [1b] . [0b] . [00] . [03] . [0e] . [02] . [9e] . [01] . [80]
avrdude: Recv: . [1b]
avrdude: Recv: . [0b]
avrdude: Recv: . [00]
avrdude: Recv: . [02]
avrdude: Recv: . [0e]
avrdude: Recv: . [02]
avrdude: Recv: . [00]
avrdude: Recv: . [1e]
avrdude: Send: . [1b] . [0c] . [00] . [0c] . [0e] . [10] . [c8] d [64] . [19] [20] . [00] S [53] . [03] . [ac] S [53] . [00] . [00] ? [3f]
avrdude: Recv: . [1b]
avrdude: Recv: . [0c]
avrdude: Recv: . [00]
avrdude: Recv: . [02]
avrdude: Recv: . [0e]
avrdude: Recv: . [10]
avrdude: Recv: . [c0]
avrdude: Recv: . [cb]
avrdude: stk500v2_command(): command failed
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
avrdude: Send: . [1b] . [0d] . [00] . [03] . [0e] . [11] . [01] . [01] . [0a]
avrdude: Recv: . [1b]
avrdude: Recv: . [0d]
avrdude: Recv: . [00]
avrdude: Recv: . [02]
avrdude: Recv: . [0e]
avrdude: Recv: . [11]
avrdude: Recv: . [00]
avrdude: Recv: . [0b]
avrdude done. Thank you.
Es wäre toll wenn du noch Lösungsvorschläge hättest.
Viele Grüße
sevi