Use a 5v relay to trip a 12v relay?

What I thought would be a quick trip to Radioshack turned into three trips and much confusion.

What I'm trying to do is use my Arduino Uno to turn on and off a 120vAC device (bedroom lamp, Christmas lights, etc).

To make a long story short, the gentleman at Radioshack did not have a 5vDC relay that would handle >1A at 120vAC and suggested I instead use a 5vDC 1A at 120vAC relay to trip a 12vDC 10A at 120vAC relay. Made sense at the time.

So right now I have:

5vDC relay, rated 1A at 120vAC (SPDT) 12v relay, rated 10A at 110/120vAC (DPDT)

I bought a 10ft extension cord from Walmart that I cut in half; I want to wire the relays in the middle. So my question is: how do I wire these things up? Where am I getting the 12vDC to trip the second relay? Here's a picture of the two relays and their packaging:

Well, 2 problems - the 5V relay looks to have a 50, 56 ohm resistance? Arduino can’t drive that. Need a transistor to drive that.
2nd, yeah you need a 12V source.
If you had 12V and the transistor, you wouldn’t need the 5V relay.

275-0217 That's not a "12V relay". It's a relay with a 120vac coil (!), so that's not happening in our Arduino context. [ ] Return it. Exchange it for a transistor or two - and get some resistors, too, 1Kohm (1/4W, 1/2W, whichever).

PS, Add a couple of 1N4001 (or 1N400x whatever they have) diodes to that list.