I want to power 1-2 16x16 RGB LED panels and control them using a 3.3v Adafruit Feather. I want to use a 5v / 5amp wall plug. In early experiments on a homemade PCB, I connected the V+ from the 5V supply into the 3V and V- into the GND pin of the Feather. It worked fine, surprisingly. [LIGHT-PAN…

[image] timothyAllan: would something like the LM1086 be right for the job? You can use any low-dropout voltage regulator with 3v3 output voltage. As far I see, the lm1086 also suitable. [image] timothyAllan: I presume I should separate the power input to the board from the power to the…

Using 5v / 5-10Amp to power LED panels AND 3.3v Adafruit Feather

Projects General Guidance

blh64 February 14, 2024, 10:15pm 8

Most definitely do not have them both connected at the same time.

Topic		Replies	Views
Stromversorgung Deutsch	5	1565	May 6, 2021
LM317T Driving me nuts General Electronics	67	22791	May 6, 2021
5v regulator Interfacing	30	12636	May 6, 2021
Sinking 5v on a 3.3v board Interfacing	5	1461	May 6, 2021
External 5V power question Frequently-Asked Questions	17	10078	May 6, 2021

Using 5v / 5-10Amp to power LED panels AND 3.3v Adafruit Feather

Related topics