Using CC3000 Breakout Board & LCD

Hi all,

I have a little project using a LCD and a fews DHC sensors. Now I want to add a wireless conecction but I dont know how I can use the CC3000 Breakout Board plus LCD with a Ardunio board.

The LCD take these pins: LiquidCrystal lcd(7, 8, 9, 10, 11 , 12);

And for the CC3000 I cant config these pins:

// CS = 2, IRQ = 3 (interrupt pin), VBAT = 5, SCK = 13, MISO = 12, MOSI = 11 Adafruit_CC3000 cc3000 = Adafruit_CC3000(2, 3, 5, SPI_CLOCK_DIVIDER);

But, how can use pins in 11 and 12?

Can I change it in LiquidCrystal or in Adafruit_CC3000 library?

The LCD take these pins: LiquidCrystal lcd(7, 8, 9, 10, 11 , 12); Change to: The LCD take these pins: LiquidCrystal lcd(4, 5, 6, 7, 8, 9);

Make sure you change the wiring to match the pin assignments.

.