Hi there i recently purchased a keyes dat logging shield as shown in the link below. http://tinkbox.ph/sites/tinkbox.ph/files/downloads/Keyes%20-%20Data%20Logging%20Module%20(rev%201.0).pdf i was having a problem reading the mpu when using this shield. It works on just the arduino, but not when c…

using i2c connection on logging shield for mpu6050

GolamMostafa November 17, 2017, 4:47pm 5

@ Ross46

You change the address of the MPU6050 sensor to 0x69 by connecting the ADO-pin to LH. Please see the following diagram.

Topic		Replies	Views
2 MPU5060 on 1 arduino Sensors	10	5584	May 6, 2021
Easily Changing I2C Address Of MPU6050 Accelerometer + Gyroscope Sensors	13	53915	May 6, 2021
How change address 0x68 on sensor is used at I2C mpu6050 Sensors	2	3808	May 6, 2021
Sparkfun MPU 6050 Default I2c address change Sensors	6	5148	May 6, 2021
How to connect two MPU-6050's to Arduino? Networking, Protocols, and Devices	4	2648	May 6, 2021