Oups, par buzzer j'entends bien ce gros bouton sur lequel on appuie, et qui bip.
Sauf que là, le buzzer ça serait un capteur -> si la main de la personne passe en dessous d'une certaine distance, du genre 20cm, alors c'est comme si elle avait pressé le buzzer. Et s'accompagne alors un son, comme quoi la personne doit répondre à la question.
Pour le capteur d'humidité, il faut se référer au lien donné (je me suis trompé de lien, ici, plutôt).
If you’re designing a device that is to be used outdoors or in an unusually hot or cold environment you might want to take into account the fact that the speed of sound in air varies with temperature, air pressure and humidity. Since the speed of sound factors into our HC-SR04 distance calculation this could affect our readings if the temperature was a lot hotter or colder than room temperature.
Pour la méthode utilisée pour le buzzer, il précise :
When using multiple sensors one obvious consideration is that you need to keep the signal emitted by one sensor from being picked up and measured by another sensor. The easiest way to accomplish this is to simply pulse the trigger on one sensor and wait until you receive the echo back before proceeding to the next sensor.
Mais ça ne fonctionne pas!