Variable global qui reste égale à zero

infobarquee · September 6, 2016, 3:15pm

bonjour,
il serait bien de reprendre l'exemple de OSC en mettant aussi tout le code

davidbouchard/arduino-osc/blob/master/examples/udpBasics/udpBasics.ino


// MESSAGE PROTOCOL OBJECT
#include <OscUDP.h>


// hardware libraries to access use the shield
#include <SPI.h>        
#include <Ethernet.h>
#include <EthernetUdp.h>


// arduino needs us to start ethernet, then start UDP
// http://arduino.cc/en/Reference/EthernetBegin


// Enter a MAC address and IP address for your SHIELD.
// The IP address will be dependent on your local network
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };

// listeningIP ==  SHIELD initialization IP

This file has been truncated. show original

ou

github.com

davidbouchard/arduino-osc/blob/master/examples/serialBasics/serialBasics.ino


// MESSAGE PROTOCOL OBJECT
#include <OscSerial.h>

// tile support libraries
#include <EthernetUdp.h>
#include <SPI.h>  

OscSerial oscSerial;
long timer;

void setup() {
  Serial.begin(9600);
  oscSerial.begin(Serial); 
  pinMode(13, OUTPUT);
}

void loop() {
  // send a message every 100 ms
  // avoid using delay() since it just blocks everything

This file has been truncated. show original

Topic		Replies	Views
Optimiser un code de commande série (Visca) Français	20	6470	May 6, 2021
Crash de l'arduino avec ardOSC Français	11	2770	May 6, 2021
Declaration Variable globales et passage valeur Français	6	2644	May 6, 2021
Fehlersuche bei globaler Varablen Deutsch	8	1385	May 6, 2021
Portée des variables ?! Français	3	1357	May 6, 2021

Variable global qui reste égale à zero

Related topics