Variaciones altas cuando utilizo la configuración de 4 Hx711 con pesos grandes, sen 10245 y ESP32

[dnieto15]

@gilshultz

Start by providing detailed information about your setup:

• What processor are you using?
• What modules or components are included?
• Is your calibration procedure the same as the one specified by the manufacturer?
• What range are you working with?

Please also post an annotated schematic of your project, showing all components, connections, and power sources. Include links to the technical documentation for each component. Additionally, what is the capacity of the HSen-10245?

This information will help us assist you more effectively.

Thanks for your recommendations:
Processor: I am using an ESP32 module, which serves as the main processor for data acquisition and communication.

• Modules and Components:
  -Load Sensor: SEN-10245 (load cell).
  -Amplifier: HX711 module for signal amplification and conversion.
  -Microcontroller: ESP32 module for data processing.
  -Power Source: USB power supply connected to the ESP32.
• Calibration Procedure: The calibration procedure involves using known weights to derive a scaling factor. While I followed a procedure inspired by the manufacturer’s recommendation, adjustments were made due to environmental conditions and hardware setup.
• Range: I have tested individual loads ranging from 10 kg to 45 kg. When combined, four loads reach approximately 100 kg.
• Schematic and Documentation: Load Cell with 3 wires - #3 by Marmotine I changed red wire for the white one.

The typical capacity of this sensor is 50 kg, as per its specifications.