Finally got it.
2 Issues
The resistors and an unsoldered pin on the vs1053 chip. Quality control issue there. The pin was just sitting on the solder on the reset line.
I reflowed the entire chip and replaced the 1.8K resistors with 1 Ohm resistors. Now I just can't forget to keep it away from the Mega board or I may get some smoke.
So with the seeed studio music player v 1.2 replace R3, R31, R32, R33, R24, R29 and R26 with 1 ohm resistor to get it working on a Arduino Due. ( At Your Own risk )
I have it working with A Fat 32 16gig SD Card Also.
Now to integrate it into the Gauges and clock.
Thank You for the help. I will keep you updated on my progress.