We were not able to create the IoT Blink controller system

[mynta]

Error code

builder/opt/libraries/seeed_arduino_rpcwifi_1_0_7 Not used: /home/builder/opt/libraries/wifiespat_1_4_3 Not used: /home/builder/opt/libraries/wifinina_1_8_14 Not used: /home/builder/opt/libraries/nina_wi_fi_1_0_1 Not used: /home/builder/opt/libraries/wifi_1_2_7 Multiple libraries were found for "Ethernet.h" Used: /home/builder/.arduino15/packages/arduino/hardware/mbed_opta/4.1.1/libraries/Ethernet Not used: /home/builder/opt/libraries/ethernet_2_0_2 Not used: /home/builder/opt/libraries/uipethernet_2_0_12 Not used: /home/builder/opt/libraries/ethernetenc_2_0_4 Not used: /home/builder/opt/libraries/eventethernet_1_0_0 Multiple libraries were found for "ArduinoECCX08.h" Used: /home/builder/opt/libraries/arduinoeccx08_1_3_8 Not used: /home/builder/opt/libraries/rak5814_atecc608a_1_0_0 Multiple libraries were found for "Wire.h" Used: /home/builder/.arduino15/packages/arduino/hardware/mbed_opta/4.1.1/libraries/Wire Not used: /home/builder/opt/libraries/flexwire_1_2_0 Error during build: exit status 1

[AresXT]

Could you describe the problem, how it is faced, which board are you using and the libraries included in code. if you can share the code it would be much better please use the <code/> tag while uploading the code.