I'm currently building two guitar effect pedals. They use analog circuitry using the Arduino as the brain to interact with the circuit via PWM pins or digital resistors. I have breadboarded both of them with an Arduino Nano each and they work flawlessly. However, a Nano is too bulky and expensive to…

How are you programming the atmega328P? A bare chip comes with the clock source set to the internal oscillator at 1MHz, you will need to set the fuses properly to change to an external 16MHz crystal. If you are using the Arduino IDE, you can use Tools > Burn Bootloader to set the fuses even if you…

Weird time behavior (millis, delay and tune) when the processor runs outside the Arduino board

Other Hardware 3rd Party Boards

guillemdc September 17, 2021, 10:52am 3

That would explain the time difference!!! I'll do it right away. Thanks David!!

Topic		Replies	Views
Atmega328p-pu on breadboard(8Mhz) gives wrong timing and delay issues 3rd Party Boards	6	4359	May 6, 2021
ATMega328 Time is Broken 3rd Party Boards	8	2860	May 6, 2021
328P at 1 MHz 3rd Party Boards	9	3477	May 6, 2021
Programming standalone ATmega328p-pu, works but runs slow 3rd Party Boards	5	5034	May 6, 2021
[SOLVED] - Self made arduino...very SLOW 3rd Party Boards	19	8152	May 6, 2021

Weird time behavior (millis, delay and tune) when the processor runs outside the Arduino board

Related topics