what is wrong with my codes

Projects Programming
1

I dont now whats wrong with my codes. i get a lot of error.
:cry:

1 int switchState = 0;

2 void setup(){

3 pinMode(3,OUTPUT);
4 pinMode(4,OUTPUT);
5 pinMode(5,OUTPUT);
6 pinMode(6,OUTPUT);
7 pinMode(7,OUTPUT);
8 pinMode(2,INPUT);
}

9 void loop(){
10 switchState = digitalRead(2);

11 if (switchState == LOW) {
//inget händer

12 digitalWrite(3, LOW);
13 digitalWrite(4, LOW);
14 digitalWrite(5, LOW);
15 digitalWrite(6, LOW);
16 digitalWrite(7, LOW);
// alla relän är av

17 else { // första trycket avbryter processen

18 digitalWrite(3, LOW);
19 digitalWrite(4, LOW);
20 digitalWrite(5, LOW);
21 digitalWrite(6, LOW);
22 digitalWrite(7, HIGH);
//processen avbryts
23 delay(1000);

24 digitalWrite(3, LOW);
25 digitalWrite(4, LOW);
26 digitalWrite(5, LOW);
27 digitalWrite(6, LOW);
28 digitalWrite(7, LOW);
}

29 else { //Andra trycket startar processen
30 digitalWrite(3, HIGH);
31 digitalWrite(4, LOW);
32 digitalWrite(5, LOW);
33 digitalWrite(6, LOW);
34 digitalWrite(7, LOW);
// stwg ett avklarad
35 delay(1000);

36 digitalWrite(3, LOW);
37 digitalWrite(4, HIGH);
38 digitalWrite(5, LOW);
39 digitalWrite(6, LOW);
40 digitalWrite(7, LOW);
//steg två avklarad
41 delay(1000);

42 digitalWrite(3, LOW);
43 digitalWrite(4, LOW);
44 digitalWrite(5, HIGH);
45 digitalWrite(6, LOW);
46 digitalWrite(7, LOW);
//steg tre avklarad
47 delay(1000);

48 digitalWrite(3, LOW);
49 digitalWrite(4, LOW);
50 digitalWrite(5, LOW);
51 digitalWrite(6, HIGH);
52 digitalWrite(7, LOW);
//steg fyra avklarad
53 delay(1000);

54 digitalWrite(3, LOW);
55 digitalWrite(4, LOW);
56 digitalWrite(5, LOW);
57 digitalWrite(6, LOW);
58 digitalWrite(7, LOW);
// processen körs
59 }
60 }

ST_2.8.ino (1.58 KB)

2

If you have line numbers in your code in the IDE then you will get an error on every line.

3

Get rid of the line numbers.
You are missing at least one }
You have an else without an if