Hi everyone!
I'm using a RGB sensor (TCS34725) with an Arduino Nano. The sensor and the code that I'm using it works perfectly. If it could be of help, I attached the code.
Well, as you can see, I get the values: red, green, blue and colour temperature. I wonder if there is a program that can use this information to make a white balance if I also provide a photo.
#include <Wire.h>
#include <Adafruit_TCS34725.h>
/* Initialise with default values (int time = 2.4ms, gain = 1x) */
// Adafruit_TCS34725 tcs = Adafruit_TCS34725();
Adafruit_TCS34725 tcs = Adafruit_TCS34725(TCS34725_INTEGRATIONTIME_700MS, TCS34725_GAIN_1X);
void setup(void) {
Serial.begin(9600);
if (!tcs.begin())
{
Serial.println("Error al iniciar TCS34725");
while (1) {
delay(1000);
Serial.println("error");
}
}
}
void loop(void) {
uint16_t r, g, b, c, colorTemp, lux;
tcs.getRawData(&r, &g, &b, &c);
colorTemp = tcs.calculateColorTemperature(r, g, b);
lux = tcs.calculateLux(r, g, b);
//Serial1.print("Temperatura color: "); Serial.print(colorTemp, DEC); Serial.println(" K");
Serial.print("Lux: "); Serial.print(lux , DEC);
Serial.print("Rojo: "); Serial.print(r, DEC);
Serial.print("Verde: "); Serial.print(g, DEC);
Serial.print("Azul: "); Serial.print(b, DEC);
Serial.print("Clear: "); Serial.print(c, DEC);
Serial.println(" ");
delay(1000);
}
If you can provide me some code it could be great!
Thanks!