Who do I notify of shematic errors on Ardunio.cc?

On http://arduino.cc/en/Tutorial/ArduinoToBreadboard

there appears to be wiring errors in the diagrams just above

this text

Using an Arduino board to burn the bootloader onto an ATmega on a breadboard (w/o an external clock).

and this text

Uploading sketches to an ATmega on a breadboard.

5V should be connected to PIN7, not PIN6

5V should be connected to PIN7, not PIN6

Look to me that it is showing +5vdc going to pin 7. Or do you see something I don't? Pin 1 of the chip is the lower left hand pin with the green wire going to it.

Lefty

retrolefty:

5V should be connected to PIN7, not PIN6

Look to me that it is showing +5vdc going to pin 7. Or do you see something I don't? Pin 1 of the chip is the lower left hand pin with the green wire going to it.

Lefty

It's very hard to see the Pin1 dot. I thought it was on the right, it's actually on the left. You are correct.

I wish they made those images so you can "Click to enlarge them"