hi thanks for the suggestion. I just changed the USB cable and thought it had fixed it but a couple of seconds after thinking it had uploaded OK and getting the white writing then got the following in orange. Any suggestions?
Sketch uses 2080 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 40 bytes (1%) of dynamic memory, leaving 2008 bytes for local variables. Maximum is 2048 bytes.
(to be precise it looks like its uploaded OK then 7 seconds later i get these error messages)
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
An error occurred while uploading the sketch