Arduino board: Leonardo IDE: v1.0.1 I2C hardware: MAG3110 magnetometer ( Triple Axis Magnetometer Breakout - MAG3110 - SEN-10619 - SparkFun Electronics ) Trying to set up the I2C sensor to take magnetic field data, but debugging is showing that Wire.endTransmission(); hangs the sketch (debug code b…

Wire.endTransmission() hangs sketch

Rajat_Bandejiya January 2, 2018, 1:14pm 8

add Wire.begin(); just before Wire.beginTransmission I think it will work

1 Like