Hi all. I'm using the Wire library with an Arduino Nano Every, as I2C master. I realized that the byte sent count returned by the .write() method is incorrect. Example: Wire.beginTransmission(address); n = Wire.write(buffer, buffer_size); Wire.endTransmission(); the n variable, as documentation …

@gfvalvo is right, just ignore the return value by Wire.write(). // -------------------------------------------- // Write data over the I2C bus // -------------------------------------------- Wire.beginTransmission(address); Wire.write(buffer, buffer_size); int error = Wire.endTransmission(); if (e…

Wire library and no ack by I2C slave

Projects Programming

clci November 14, 2021, 8:56pm 4

Thanks a lot!

Topic		Replies	Views
Acklowledge test on I2C bus Interfacing	3	5060	May 6, 2021
Wire.write Problem. Arduino nano not sending data Programming	9	4017	May 5, 2021
More than 1 bytes not being properly sent through I2C? Programming	4	1713	May 5, 2021
[I2C] Wire library messages not sending Networking, Protocols, and Devices	2	965	May 6, 2021
How to Check whether device acknowledged in I2C?? 3rd Party Boards	3	10402	May 6, 2021

Wire library and no ack by I2C slave

Related topics